In-line filter 1/2 BSP
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
D..
In-line filter, regulator & lubricator 1/4 BSP
In-line water traps/filters are necessary to separate water and oil from the airflow during the air compression process.
A regulator is combined with the filter to increase or decrease the pressure.
A pressure gauge indicates the set press..
In-line lubricator 1/4 BSP
The lubricator is fitted inline for air tools that require lubrication from pneumatic oil.
Visible arrows are on the outer body of the casing that indicate the direction of installation to
correspond with the direction of airflow.
For a lubricator (oiler) to..
Pneumatic Oil
The professional grade pneumatic oil is filled inside a lubricator. The oil is used to extend life, reduce wear and prevents corrosion on moving parts inside pneumatic power tools.
Ideally, a lubricator should be fitted within a 15m distance from the pneumatic tool.
Pneu..
Pressure
filter for compressed air
Type F180 (12 Bar)
The F-180 Compressed Filter is a tool designed with jettisoning and protection cup. The cup has a fluid capacity if 30 ml. It has a maximum inlet pressure of 12 bar and a filtering of 10 micron. Moreover, this compressed filter has a m..
Modular
filter/regulator/lubricator
Type FRL200
Regulator range: 0 - 12 Bar
It has a maximum inlet pressure of 16 bar
Filtration: 10 micron
Maximum flow rate of 5000 Nl/min at 6 bar.
Manometer included.
Regulator with control knob with lock.
Made
in Italy
1/2 in..
Modular
filter/regulator/lubricator
Type FRL300
Regulator range: 0 - 12 Bar
It has a maximum inlet pressure of 16 bar
Filtration: 10 micron
Maximum flow rate of 8000 Nl/min at 6 bar.
Manometer included.
Regulator with control knob with lock.
Made
in Italy
1 inc..