100MM DIAMOND POLISHING PAD 2000 GRIT DRY USE
- Stock: In Stock
- Model: TCDP22000
- Weight: 0.04kg
- Dimensions: 156.00cm x 121.00cm x 4.00cm
- SKU: TCDP22000
- UPC: 6009515863623
190 samples sold
Product Views: 53
R 263.29
Ex Tax: R 228.95
TorkCraft - Dry Use Diamond Polishing Pad
Grit: #2000
Application:
The Tork Craft Dry use diamond polish pads 100mm is for marble and granite, choose from 50-3000 Grit. Optimized for polishing marble, granite and stone. Recommended to use polishing machine, Tork Craft option POL 06
- Ideal for both contractors and DIY users.
- Suitable for wet use.
- Hook & Loop back for fast pad change.
- Recommended Tork Craft backing pads SPC00117 100mm x M14 or SPC00118 100mm x 5/8UNC
- Grit sizes available 50 / 150 / 300 / 500 / 1000 / 2000 / 3000
Guide for usage
- Wear an apron, a gauze mask and safety glasses. Connect a backing pad to the polisher, and attach the polishing pad to the backing pad. Set the speed at 3000 - 4000 RPM and start the polishing process.
- Moving two passes across and one pass up and down is a good technique. Make sure all prior scratches are removed before moving onto a higher grit. Reapeat the same process using all 7 pads to complete the polishing process. Polish from grit 50 - 3000 respectively. Do not skip.
- If you want to achieve the best polishing results on granite or other natural stones, use Buff Pad as the last step. Wet the workpiece and run the Buff pad semi-wet with very low water. When the water is consumed, the process is complete. Repeat as necessary to improve the look and achieve the mirror effect result.
Steps by pad:
Pad | Grit |
1. Grey | 50 |
2. Yellow | 150 |
3. Orange | 300 |
4. Red | 500 |
5. Dark Green | 1000 |
6. Green | 2000 |
7. Pink | 3000 |
WARNING: Using any tool can be dangerous. Always select the right tool for the job.