Wood spade drill bit - Standard
Daimeter: Ø22.0mm
Working length: 400mm
Shank: 6.35mm hex for quick change
Application:
A spade drill bit is used for rough boring in wood.
Spade drill bits can be used to drill in:
Hard wood
Soft wood
Chipboard
MDF
Plywood
Manufactured from ..
Spade drill bit extension
Length: 300mm
Shank: 6.35mm hex for quick change
Application:
Use the extension to add extra length to a spade bit. The extension can be
used with the standard and the Pro series spade bits.
NOTE:
Secure both grub screws with the supplied allen key before use....
Plug Cutter - 10mm
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
Bit p..
Plug Cutter - 14mm
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
Bit p..
Plug Cutter - 25mm
There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged.
The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter.
Bit p..
Expansive auger bit Ø15-45mm
Application:
An expansive auger bit has an adjustable cutter, for boring holes of different
diameters.
A scale on the cutter blade indicates the diameter of the hole to be bored.
It is a must have for a woodworker who is required to drill an odd size diameter
h..
Expansive auger bit Ø22-76mm
Application:
An expansive auger bit has an adjustable cutter, for boring holes of different
diameters.
A scale on the cutter blade indicates the diameter of the hole to be bored.
It is a must have for a woodworker who is required to drill an odd size diameter
h..
Forstner bits by Tork Craft
38mm Forstner bit
Drill pocket holes, flat bottom holes, etc. using any 10mm or larger portable
drill or stationary drill press. Forstner pattern bits are well known for their
ability to drill clean and chip-free holes in wood. Made of quality steel. Large
..
Hinge bore Ø35mm
A hinge bore is required if you need to use cup shaped euro hinges for a
wooden cupboard door.
How to use the Hinge bore bit:
The radius of the hinge bore is 17.5mm and it is also the centre point distance. It
would be safe to have a 4-5mm shoulder from the side of the cu..
TorkCraft - Scotch Eye Auger Bit
Size: 14.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locati..
TorkCraft - Scotch Eye Auger Bit
Size: 16.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locati..
TorkCraft - Scotch Eye Auger Bit
Size: 22.0 x 400 mm
Shank:
Scotched Eye
Application:
An auger handle / rod is placed through the eye and the auger is turned by
hand to bore.
For boring a wide range of holes in hardwoods in a variety of locati..