Classic Torx Bits - 50 mm
TX Bit No. TX20
Packaging: Bulk (sold
per piece)
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other b..
Classic Torx Bits - 50 mm
TX Bit No. TX25
Packaging: 2 Pack Carded
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are op..
Classic Torx Bits - 50 mm
TX Bit No. TX25
Packaging: Bulk (sold
per piece)
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other b..
Classic Torx Bits - 50 mm
TX Bit No. TX27
Packaging: 2 Pack Carded
The
Classic Torx Bit is hardened using a special procedure. The tough version resulting
from this method meets the demands across all areas of industry and craft.
Based on the Standard Bit, the other bits are op..
Classic Hexagon Tamper Proof Bits
Tamper Proof Hex Bit: 6 mm (length: 25 mm)
Packaging: Bulk (sold per piece)
The Tamper Proof
Hex driver is developed as a security application. See the picture of the example screw. The Classic Hexagon Bit is hardened using a special procedure. ..
Magnetic Bit Holder
Magnetic Bit Holder ¼'
Length: 72mm
Packaging: Bulk (sold per piece)
An extension to use with your screwdriver to hold a Pozidriv, Square, Phillips or Slotted screwdriver bit by means of a magnet. Very useful to hold screws without hurting fingers. All bits with a ..
Screwdriver bit holder
Application:
The screwdriver is designed to be ergonomic and wear resistant. The bit
holder is magnetic to keep the bit and screw in place
The screwdriver can be used with all standard 1/4' shank
bits.....
Magnetic bit holder
Hex
shank: 6.35mm (1/4')
Length: 54mm
Packaging: Carded 1
Application:
The bit holder is used with all hex shank 6.35mm bits. The bit holder features a
magnet to keep the bit in place and to assist with holding screws when
screwdriving.
The shank is compatib..
Magnetic bit holder
Hex
shank: 6.35mm (1/4')
Length: 75mm
Packaging: Bulk
Application:
The bit holder is used with all hex shank 6.35mm bits. The bit holder features a
magnet to keep the bit in place and to assist with holding screws when
screwdriving.
The shank is compatible w..
Nutsetter
Size:
8mm
Length: 65mm
Packaging: Bulk
Application:
The nutsetter is used to quickly and easily fasten sheet metal screws and other hexagonal head
screws.
The nutsetter features:
Standard six-point design
Magnet to fold screws
Use with our SNAP-IT! range qu..