TorkCraft - Screw Lock
QTY: 1 | 50 gram
Application:
Thread locker for small size threads, for use on brass / zinc / steel.
Clean surface with an oil free cleaning solvent before applying adhessive.
Use on:
Brass
Zinc
Steel
Low Strength
Anaerobic adhesiv..
Drill Straps with 12 Power Bits
Drill Straps
Keeps powerbits handy, sexurely holds bit, comfortable fit & one size gits all.
Bits are made from S2 material for long life & Holds standard 1/4' Hex, 25 mm
insert and 50 mm powebits
Trimmable strap allows for comfortable wrist fit & fits..
TorkCraft - Sleeve Lock
QTY: 1 | 250 gram
Application:
Retaining
large size cylindrical parts, for use on brass / zinc / steel.
Clean surface with an oil free cleaning solvent before applying adhessive.
Use on:
Brass
Zinc
Steel
High Strength
Anaerobic..
TorkCraft - Stud Lock
QTY: 1 | 10 gram
Application:
Thread locker for standard size threads, for use on brass / zinc / steel.
Clean surface with an oil free cleaning solvent before applying adhessive.
Use on:
Brass
Zinc
Steel
High Strength
Anaerobic adhe..
EN8 ELECTRO GALV STUD M10X90
Explaining the difference between EN8 and 8.8 steel as indicted
8.8 is ISO 898–1 grading for Bolts and screws. It indicates a bolt/screw with
tensile strength of minimum 800MPa and a yield strength of 80% of 800MPa = 640MPa.
Depending on thickness these are ei..
EN8 ELECTRO GALV STUD M12X110
Explaining the difference between EN8 and 8.8 steel as indicted
8.8 is ISO 898–1 grading for Bolts and screws. It indicates a bolt/screw with
tensile strength of minimum 800MPa and a yield strength of 80% of 800MPa = 640MPa.
Depending on thickness these are e..
EN8 ELECTRO GALV STUD M12X170
Explaining the difference between EN8 and 8.8 steel as indicted
8.8 is ISO 898–1 grading for Bolts and screws. It indicates a bolt/screw with
tensile strength of minimum 800MPa and a yield strength of 80% of 800MPa = 640MPa.
Depending on thickness these are e..